The Blueair 3210 uses Blueair’s established filtration technology, which comprises a combination of electrostatic and mechanical filtration. This approach means that a less denser filter can be used whilst maintain high airflow levels.
The Blueair 3210 features a one-touch auto mode. When enabled, this mode adjusts the speed of the fan to correspond to the level of pollution detected by the integrated particle sensor. The included LED also changed based on the level of pollution to let you know how polluted your environment is.
It can be placed anywhere in the room due to the 360 degree air intake.
One of the features of the Blueair 3210 is its interchangeable fabric pre-filters which can be swapped out depending on your environment or décor.
| Dimensions | 425 x 200 x 200 mm |
| Power Usage: | 2-10 Watt |
| Weight (without/ with packaging) : | 1.68kg: 3.9 lbs / 2.8 kg: 6.2 lbs |
| Filter Service Life: | According to the manufacturer the filter should be replaced after 6 months. |
| Sound Level: | 18-48 dB(A) |
| Wi-Fi: | No |
| Remote Control: | No |
| |
| Castors | No |
| |
| Accessories | No |
| |
| Air Quality Monitor | Yes |
| |
| Auto mode: | Yes |
| Electronic sensor: | Yes |
| Filter replacement indicator: | Yes |
| On/off timer: | No |
| Speed control options | 3 speed settings |
| Air outlet | Top |
| Air inlet: | 360° |
| Warranty | 2 year manufacturer warranty |
| Country of Manufacture: | China |
LED air quality display
Stay up to date on the status of your indoor air with the LED air quality indicator (AQI). The display changes colour to indicate good, moderate or poor based on the current concentration of fine particles (PM2.5) measured by the integrated particle sensor.
One-button design
Single button controls it all and lets you know when it's time to replace the filter. After about 7 seconds the button's LED light automatically dims to 0% brightness.
Easy filter change
The built-in LED glows red when it's time to change the filter. For optimal performance, Blueair recommends replacing the filter every 6 months when used 24 hours a day.
While typical air purifiers simply push dirty air through a filter, HEPASilent™ technology combines two filtration technologies. The result is more clean air at a faster rate, with whisper-silent operation that consumes less energy than a lightbulb.
Airborne particles receive an electrical charge that makes them ‘sticky’ – so instead of simply passing through, smaller particles stick to the filter. Larger particles are caught in the filter mesh.
This unique combination of two filtration technologies effectively removes 99.97% of airborne particles down to 0.1 micron, trapping viruses and micro plastics in addition to dust, pollen, pet dander, bacteria and smoke. Activated carbon in our filters then removes small amounts of odours, gases and VOC’s.
Because the charged particles stick to the filters more easily, less dense filters can be used, which require less air pressure to push air through.
