In stock - same day dispatch
Buy now in 4 instalments with
The Blueair 3410 features Blueair’s unique combination of electrostatic and mechanical filtration called HEPASilent™ filtration technology. The combination allows filters that are less dense to perform without a loss in performance— resulting in quiet and energy-efficient air purifiers.
The 3410 has a one-touch enabled Auto mode which when enabled, the air purifier auto-adjusts the fan speed based on real-time conditions reported by the integrated particle sensor.
The Blueair 3410 uses a 360-degree air intake, meaning you can place it almost anywhere in the room without compromising performance. It also uses less energy than the average LED lightbulb (3-35 W).
The 3410 features interchangeable fabric pre-filters which can be swapped out depending on your environment or décor.
Dimensions | (HxWxD): 52 x 26 x 26cm |
Power Usage: | 3- 36 Watt |
Weight | 3.1 kg |
Filter Service Life: | According to the manufacturer the filter should be replaced after 6 months. |
Replacement Filters: | Blueair Blue 3410 Series Filter |
Wi-Fi: | No |
Remote Control: | No |
Castors | No |
Accessories | No |
Air Quality Monitor | Yes |
Auto mode: | Yes |
Electronic sensor: | No |
Filter replacement indicator: | Yes |
On/off timer: | No |
Speed control options | 4 speed settings |
Air outlet | Top |
Air inlet: | 360° |
Warranty | 2 year manufacturer warranty |
Country of Manufacture: | China |
LED air quality display
Stay up to date on the status of your indoor air with the LED air quality indicator (AQI). The display changes colour to indicate good, moderate or poor based on the current concentration of fine particles (PM2.5) measured by the integrated particle sensor.
One-button design
Single button controls it all and lets you know when it's time to replace the filter. After about 7 seconds the button's LED light automatically dims to 0% brightness.
Easy filter change
The built-in LED warning system glows red when it's time for a change. For optimal performance, we recommend replacing every 6 months when used 24 hours a day.
Filtration Technology
While typical air purifiers simply push dirty air through a filter, HEPASilent™ technology combines two filtration technologies. The result is more clean air at a faster rate, with whisper-silent operation that consumes less energy than a lightbulb.
Airborne particles receive an electrical charge that makes them ‘sticky’ – so instead of simply passing through, smaller particles stick to the filter. Larger particles are caught in the filter mesh.
This unique combination of two filtration technologies effectively removes 99.97% of airborne particles down to 0.1 micron, trapping viruses and micro plastics in addition to dust, pollen, pet dander, bacteria and smoke. Activated carbon in our filters then removes small amounts of odours, gases and VOC’s.
Because the charged particles stick to the filters more easily, less dense filters can be used, which require less air pressure to push air through.
The Blueair 3410 features Blueair’s unique combination of electrostatic and mechanical filtration called HEPASilent™ filtration technology. The combination allows filters that are less dense to perform without a loss in performance— resulting in quiet and energy-efficient air purifiers.
The 3410 has a one-touch enabled Auto mode which when enabled, the air purifier auto-adjusts the fan speed based on real-time conditions reported by the integrated particle sensor.
The Blueair 3410 uses a 360-degree air intake, meaning you can place it almost anywhere in the room without compromising performance. It also uses less energy than the average LED lightbulb (3-35 W).
The 3410 features interchangeable fabric pre-filters which can be swapped out depending on your environment or décor.
Dimensions | (HxWxD): 52 x 26 x 26cm |
Power Usage: | 3- 36 Watt |
Weight | 3.1 kg |
Filter Service Life: | According to the manufacturer the filter should be replaced after 6 months. |
Replacement Filters: | Blueair Blue 3410 Series Filter |
Wi-Fi: | No |
Remote Control: | No |
Castors | No |
Accessories | No |
Air Quality Monitor | Yes |
Auto mode: | Yes |
Electronic sensor: | No |
Filter replacement indicator: | Yes |
On/off timer: | No |
Speed control options | 4 speed settings |
Air outlet | Top |
Air inlet: | 360° |
Warranty | 2 year manufacturer warranty |
Country of Manufacture: | China |
LED air quality display
Stay up to date on the status of your indoor air with the LED air quality indicator (AQI). The display changes colour to indicate good, moderate or poor based on the current concentration of fine particles (PM2.5) measured by the integrated particle sensor.
One-button design
Single button controls it all and lets you know when it's time to replace the filter. After about 7 seconds the button's LED light automatically dims to 0% brightness.
Easy filter change
The built-in LED warning system glows red when it's time for a change. For optimal performance, we recommend replacing every 6 months when used 24 hours a day.
Filtration Technology
While typical air purifiers simply push dirty air through a filter, HEPASilent™ technology combines two filtration technologies. The result is more clean air at a faster rate, with whisper-silent operation that consumes less energy than a lightbulb.
Airborne particles receive an electrical charge that makes them ‘sticky’ – so instead of simply passing through, smaller particles stick to the filter. Larger particles are caught in the filter mesh.
This unique combination of two filtration technologies effectively removes 99.97% of airborne particles down to 0.1 micron, trapping viruses and micro plastics in addition to dust, pollen, pet dander, bacteria and smoke. Activated carbon in our filters then removes small amounts of odours, gases and VOC’s.
Because the charged particles stick to the filters more easily, less dense filters can be used, which require less air pressure to push air through.